HP Probook 4440s No Audio on Sierra

Hi i am really hoping u guys can help me get audio working for my probook 4440s in Sierra..I used chris111 MacOSX Sierra USB installer and have everything working except audio...It uses the IDT 92HD87B2/4 = 111d76d9 ....The audio works fine in Macosx El capitan..But now i am in Sierra can't get it to work..ANy help will be greatly appreciated ..thanks.

platinumsteel a écrit:Hi i am really hoping u guys can help me get audio working for my probook 4440s in Sierra..I used chris111 MacOSX Sierra USB installer and have everything working except audio...It uses the IDT 92HD87B2/4 = 111d76d9  ....The audio works fine in Macosx El capitan..But now i am in Sierra can't get it to work..ANy help will be greatly appreciated ..thanks.

Did you try AppleALC with Lilu on Clover kexts /10.12
Sorry late delay I did not see the post  

Hi i may have missed it..But can u tell me where I can find that AppleALC with Lilu on Clover kexts 10.12 ..Will love to give it a try thanks.

platinumsteel a écrit:Hi i may have missed it..But can u tell me where I can find that AppleALC with Lilu on Clover kexts 10.12 ..Will love to give it a try thanks.

Read this attentively
See this
https://github.com/vit9696/AppleALC

This for Lilu
https://github.com/vit9696/Lilu
Good Luck

Yes thanks a lot for that link..I looked into the resources folder and i see he has the support for my audio..Only thing i need to figure out how to install it...Will try my best to see how to install it..Thanks a million pal..was looking all over for it..

platinumsteel a écrit:Yes thanks a lot for that link..I looked into the resources folder and i see he has the support for my audio..Only thing i need to figure out how to install it...Will try my best to see how to install it..Thanks a million pal..was looking all over for it..

If you have native AppleHDA untouched I have a source here you can test

Put IN EFI /Clover /kexts /10.12
Here my source
Let my know

Ok i had made a backup of the native applehdakext but i can't seem to locate it now..I am gonna do over macosx sierra and make a backup of the kext..then use the source that u sent me...thx will let u know hopefully later tonight...

platinumsteel a écrit:Ok i had made a backup of the native applehdakext but i can't seem to locate it now..I am gonna do over macosx sierra and make a backup of the kext..then use the source that u sent me...thx will let u know hopefully later tonight...

Remember you need native AppleHDA for make it AppeALC to work

Ok so if i do over a fresh install of sierra won't it have native applehda in system extensions?

platinumsteel a écrit:Ok so if i do over a fresh install of sierra won't it have native applehda in system extensions?

Here native ApleHDA 10.12.4

Dont used any patch HDA kext in Clover config.plist

What is your exact specs of the Probook ?
CPU /Graphics/Memory /SSD

Do you have a DSDT.aml ?

The exact specs are IntelHD 4000 Intel Core i3 with SSD drive...And am not sure it has a dsdt.aml for sierra..I know i had one for El Capitan...But to install Sierra I used your MacOSX Sierra Installer 1.8 and it's booted ok.At the moment am re-installing Sierra 10.12.4 with your tool again..And i want to start fresh...So will try the sources u told me about and see if i am lucky to get Audio...Thanks again.

Ok dont install Nothing

Used my Probook Post Installer after Installation

you see EFI Mounted at the end, go to CLOVER/ACPI/patched and remove
DSDT and SSDT and put your DSDt.aml

Reboot  let me know


Used Probook V6

Chek Bluthhot and SD card if you have  

Yooooo....Man i am telling you you might be the greatest Hackintosh admin alive!!!!!..I did exactly as u told me..I backed up my dsdt.aml from my El capitan install..Used your HP Probook V6 installed it..Then went to Clover/ACPI/ patched amd remove the dsdt and ssdt from there..and put my DSDT.aml there ...And I rebooted and I didn't even have to touch a thing...The audio magically appeared...Man u made my day..Am like so happy..Your probook installer works sweet...What i am going to do now is make a backup of my entire EFI Folder..So anytime i re-install i think i can just replace the EFI with that fully working one..thanks again.

platinumsteel a écrit:Yooooo....Man i am telling you you might be the greatest Hackintosh admin alive!!!!!..I did exactly as u told me..I backed up my dsdt.aml from my El capitan install..Used your HP Probook V6 installed it..Then went to Clover/ACPI/ patched amd remove the dsdt and ssdt from there..and put my DSDT.aml there ...And I rebooted and I didn't even have to touch a thing...The audio magically appeared...Man u made my day..Am like so happy..Your probook installer works sweet...What i am going to do now is make a backup of my entire EFI Folder..So anytime i re-install i think i can just replace the EFI with that fully working one..thanks again.

Thanks

Now open HWMonitor in Application Like this
See Picture and
Unchek Update BOX
Enjoy

USAGE:

If you are Install some thing in your Hackintosh and you want prevent issue, used this tools before reboot
the tools
"Rebuild Caches!"
"Rebuild system-prelinked-kernel!"

Enjoy

Yes thanks a million..Everything is working now...One more thing..am seeing a small macosx update...Am scared to update i might lose my audio again..sigh...

platinumsteel a écrit:Yes thanks a million..Everything is working now...One more thing..am seeing a small macosx update...Am scared to update i might lose my audio again..sigh...

You can Update
With AppleALC you can not lose Audio

Enjoy
Made an EFI backup as you mentioned
Thats a pleasure to helping you
have a nice day.

Update Post Installer body See read me now V7 Support 3 Probook Models
Enjoy


Downloads ➤ Post Installer MacOS Sierra HP Probook-V7

Enjoy!

Awesome thanks a lot for this..really needed it..Will give it a test sometime today.

By the way can u tell me how to get your Clover Montreal Screen to countdown and boot directly into Macosx? When it shows up i have to press Enter again to get it to log in..

platinumsteel a écrit:By the way can u tell me how to get your Clover Montreal Screen to countdown and boot directly into Macosx? When it shows up i have to press Enter again to get it to log in..

Do you have this to key in clover config.plist


<key>DefaultVolume</key>
<string>NAME OF YOUR SSD</string>

<key>Timeout</key>
<integer>5</integer>

This is what I see in my config.plist

platinumsteel a écrit:This is what I see in my config.plist

Ok so just put the exact name of your SSD
and set the timeout you want

EDIT ***
Replace MacHDD by the exact name of your SSD
and set the timeout you want

Ok thanks a lot I edit it using Text Edit..and it is working now as I want it..Thanks again.